top of page

Pacific Strike: A simply magnetic sim!

2m
9 min read
Pacific Strike.

Pacific Strike is the Origin WWII combat flight sim about the air war in the Pacific theater. It never received the same acclaim as the earlier Strike Commander despite being built with the same RealSpace engine. It wouldn't be until the later Wings of Glory that the engine would be given a substantial overhaul for later hardware.


This game and speech pack expansion is only available on floppy disk, as the planned CD-ROM release was cancelled due to poor sales. The game also faced strong competition, as 1942: Pacific Air War was also released around the same time.


Contents


Strategy


This guide will be trying to get Pacific Strike to run as optimally as possible under DOSBox Staging v0.83.0. This requires covering the version and patch history, creating a suitable DOSBox config and tools, covering the Sound Blaster sound and music, Roland MT-32 music and General MIDI music. A 4-axis HOTAS will be configured before the installation, patching and configuration steps are covered.


Version and patch history


Due to the cancellation of the CD-ROM edition there is a limited version and patch history for Pacific Strike. Its poor sales meant it wasn't included in compilations.


Pacific Strike box.

Pacific Strike (April 1994)


There was only a single Pacific Strike release in April 1994. Developed by Origin Systems and published by Electronic Arts. The game version is listed as F1.18 and the release notes are dated the 20 April 1994. The game was packaged as a multi-disk zip archive. The release notes are included below:



It was distributed on:


  • 9 x 1.44MB High Density (HD) 3.5" floppy disks.


Pacific Strike: Speech Pack box.

Pacific Strike: Speech Pack (April 1994)


The one and only expansion was the Pacific Strike: Speech Pack released around the same time as the base game. It was developed by Origin Systems and published by Electronic Arts. The game version remains unchanged at F1.18.


There are no release notes included with the speech files, however file timestamps indicate a date of March 1994. The expansion, like the base game, was packaged as a multi-disk zip archive. It was distributed on:


  • 4 x 1.44MB High Density (HD) 3.5" floppy disks.


F1.19 update patch (May 1994)


The one and only patch was released in May 1994. It was a bug-fix patch fixing a variety of hardware and performance issues and also fixing various aspects of the game. The patch release notes are shown below:



It was distributed as a zip archive, and remains available from:



Documents


Due to the relatively large number of different documents included with Pacific Strike the following list is broken down by document. The following documents are available digitally:


  • Install Guide (pdf document, download).

  • Install Guide Changes (pdf document, download).


  • Errata Additions (pdf document, download).





The above pdf documents are also available as a single zip archive from:



The following Pacific Strike: Speech Pack documents are available digitally:


  • Speech Pack: Install Guide  (pdf document, download).


The following strategy guides are available digitally:



Preparation


This section covers the required preparation before installing or configuring the games under DOSBox.


Retail media


Due to the age of the media and the drives required to read them, it is recommended to rip floppy disks to either ima or img image files, to save wear and tear on media and the mechanical drives.


Game management


It is recommended to use a game management strategy or similar strategy you may have adopted. The recommended game management folders are:


  • fdd - for floppy disk images.

  • hdd - the folder used as the emulated DOSBox hard disk (see hdd folder).


  • conf - to store DOSBox and HOTAS configuration files.

  • docs - for documents.

  • patch - to store patches.


These management folders are placed in the following game folder (as an example), and used in the rest of the guide:

D:\Games\DOS\Pacific Strike

DOSBox


This guide assumes the latest version of DOSBox Staging v0.83.0 has been installed, is fully working and has been run at least once to create a default configuration file. It is also assumed only a single copy of DOSBox Staging is installed, with each game, having its own configuration file (with settings differing from the default configuration file).


Config


This config uses a combination of settings taken from the Strike Commander DOSBox config which uses the same RealSpace engine and from various snippets found in VOGONS threads or around the Internet.

# This is the configuration file for Pacific Strike.

[sdl]
fullscreen = on

[cpu]
core = normal
cpu_cycles = 35000
cpu_cycles_protected = auto
cycleup = 500
cycledown = 500

[voodoo]
voodoo = off

[mixer]
reverb = small
chorus = light

[mt32]
model = mt32_old
romdir = "D:\Midi\Versioned"

[fluidsynth]
soundfont = "Shan SGM Pro 15.SF2"
soundfont_dir = "D:\Midi\Soundfonts"

[soundcanvas]
soundcanvas_model = auto
soundcanvas_rom_dir = "D:\Midi\soundcanvas\ROMs"

[midi]
mididevice = soundcanvas
midiconfig = 0

[joystick]
joysticktype = ch
timed = off
swap34 = on
deadzone = 0

[autoexec]
@echo off

# Example hdd folder mount
mount c "D:\Games\Dos\Pacific Strike\hdd"

# Example floppy disk mount
mount a "D:\Games\Dos\Pacific Strike\fdd\*.img" -t floppy

c:

# Running the game
# cd ps
# pacific.exe
# pause
# exit

# Running the launcher
# call psmenu.bat

This config can be found in the following GitHub repository: DarkenedRoom/dosbox-staging-configs/Pacific Strike/PacificStrike-staging.conf.


In the [cpu] section the normal core is used, similar to Strike Commander. A recommended cycle count ranges from 20000 - 30000 cycles. 35000 seems to provide fairly smooth performance whilst allowing enemy aircraft to be destroyed. cpu_cycles_protected is set to auto to get its value from cpu_cycles. cycleup and cycledown are changed to values instead of percentages for consistent changes.


In the [voodoo] section, emulation isn't required and is disabled.


The [mixer] settings are an example and can be changed to a personal preference, however a small reverb and light chorus may be more suited to constant engine noise while in flight.


Pacific Strike supports Roland MT-32 type devices. The recommended model, mt32_old, is taken from the VOGONS wiki article,  List of MT-32-compatible computer games.


Pacific Strike supports general MIDI so example settings are provided for the Sound Canvas, Fluidsynth and external (port) MIDI devices. See Sound for further details.


The [midi] section is configured to use a Sound Canvas MIDI device by default. The midiconfig setting is only used by the external (port) device and is defaulted to 0.  See Sound for further details.


The [joystick] section has the joysticktype set to ch as the game supports the CH Flightstick Pro. This game also seems to benefit substantially by having timed intervals disabled. The swap34 setting and deadzone are examples appropriate for my controllers and personal preference, you may wish to adjust it.


The [autoexec] section has example hard disk and floppy disk mount commands. There are examples for running the game from the DOS session or using the psmenu launcher tool.


Tools


A Pacific Strike launcher menu (psmenu.bat) has been created to simplify the following tasks:


  • Running the game.

  • Running the graphics and sound setup.

  • Viewing the release notes.

  • Save file backup and restore.

  • Selecting a MIDI device: Roland MT-32, Sound Canvas, Fluidsynth or an external MIDI device.

  • Returning to the DOSBox DOS prompt.

  • Quitting DOSBox.


The Pacific Strike launcher can be found in the following GitHub repository:

DarkenedRoom/dosbox-staging-configs/Pacific Strike/PSMENU.BAT.


It should be extracted into the hdd folder. e.g.

D:\Games\DOS\Pacific Strike\hdd		(in Win10/11 becomes)
C:\								(in DOSBox)

Sound


Pacific Strike supports Sound Blaster digital sound and Sound Blaster, Roland MT-32 or General MIDI music.


Sound Blaster


The default Sound Blaster settings set in the default DOSBox config are appropriate for Sound Blaster digital sound and music and do not require altering in the Pacific Strike DOSBox config. However, the following settings may be useful to refer to when configuring the game:


  • Music Card: WaveBlaster/SB16

  • Port: 330


  • Speech Card: Sound Blaster PRO/SB16

  • Port: 220

  • IRQ: 7

  • DMA: 1


Roland Music


The Roland music available when choosing the Roland option, uses a Roland standard rather than the General MIDI (GM) standard. Despite the install option for Roland music listed as Roland LAPC-1 (CM32L compatible), the  recommended model is mt32_old, as taken from the VOGONS wiki article,  List of MT-32-compatible computer games.


The following settings enable the MT-32 synth and selects the MT-32 as the MIDI device. The romdir setting is an example folder using versioned ROMs; for more information, see Roland MT-32 in the DOSBox Staging user manual.


[mt32]
model = mt32_old
romdir = "D:\Midi\Versioned"

[midi]
mididevice = mt32

The following settings may be useful to refer to when configuring the game:


  • Music Card: Roland LAPC-1

  • Port: 330


 It is recommended to consult the Roland MT-32 page of the DOSBox Staging user manual.


General MIDI


The following settings apply to all MIDI devices below when configuring the game:


  • Music Card: General MIDI

  • Port: 330


Sound Canvas


The following settings enable the Sound Canvas synth and selects the Sound Canvas as the MIDI device:

[soundcanvas]
soundcanvas_model = auto
soundcanvas_rom_dir = "D:\Midi\soundcanvas\ROMs"

[midi]
mididevice = soundcanvas

The soundcanvas_rom_dir is an example only. It is recommended to consult the Roland Sound Canvas page of the DOSBox Staging user manual.


Fluidsynth


The following settings enable Fluidsynth and selects Fluidsynth as the MIDI device:

[fluidsynth]
soundfont = "Shan SGM Pro 15.SF2"
soundfont_dir = "D:\Midi\Soundfonts"

[midi]
mididevice = fluidsynth

The soundfont and soundfont_dir are examples only. It is recommended to consult the Fluidsynth page of the DOSBox Staging user manual.


External (port)


The following settings enable an external (to DOSBox) MIDI synth and selects it as the MIDI device:

[midi]
mididevice = port
midiconfig = 0

The midiconfig is an example only. It is recommended to consult the Using external MIDI devices section of the DOSBox Staging user manual.


The following earlier articles cover using virtual software synths:



Controls


The following section covers joystick/HOTAS setup.


HOTAS config


Joystick, throttle and rudder pedals are supported. Configuring axes may not be required if your HOTAS has 4 axes or less. When using a combination of devices totaling more than 4 axes, a virtual controller can be configured (with vendor software or Joystick Gremlin), limited to 4 axes.


For those using controllers from multiple vendors, the vJoy/Joystick Gremlin combination may be required instead of vendor specific HOTAS profile software. You may also have to use HidHide as a device firewall, to hide your real controllers, so only the vJoy virtual controllers are detected by Pacific Strike. [6][7][8].


The physical axes to Windows axes were configured as follows:

Physical axis

Windows axis

Joystick x-axis

DX_X_AXIS

Joystick y-axis

DX_Y_AXIS

Throttle

DX_Z_AXIS

Rudder

DX_XROT_AXIS


The following DOSBox config settings are suggested, depending on controller hardware:

[joystick]
joysticktype = ch
timed = off

Pacific Strike supports the CH Flightstick Pro so the ch joysticktype is used. The appropriate in-game joystick is covered by In-game configuration.


Installation


The order of installation is straightforward, with:


  • Pacific Strike.

  • Pacific Strike: Speech Pack.

  • F1.19 update patch.


Before the Pacific Strike installation can be run, loadfix must be used to reduce the amount of conventional memory, otherwise the installer app will fail. The following command should be issued:

C:\> loadfix.com 

Then the installation app on the first mounted floppy disk image is run with:

A:\> install.exe

The following gallery shows the installation steps:


  • Main menu. Start by selecting the music card.

It is recommended to use the default installation folder, PS.


As the files are stored across a multi-disk zip archive, the installer reads the first disk, then last disk and then begins the install from the first disk. This means an installation requires considerable disk image swapping in DOSBox with <CTRL> F4.


Once installation is complete, the memory allocated by loadfix can be freed with:

C:\> loadfix.com -f

Speech Pack installation


The Speech Pack installation does not require any conventional memory to be allocated with loadfix.


The installation app on the first mounted floppy disk image is run with:

A:\> install.exe

The following gallery shows the installation steps:


  • Selecting a music and speech card should be unnecessary, so install can be selected.
  • During the install, the last disk in the zip archive is read before the others.
  • Installation in progress. Starting with the first disk.
  • After the last disk, installation is complete.

The installation steps are similar to the base game, but don't require selecting a music card, speech card or local bus graphics card.


As the files are stored across a multi-disk zip archive (like the base game), the installer reads the first disk, then last disk and then begins the install from the first disk. This means an installation requires disk image swapping in DOSBox with <CTRL> F4.


Patching


To apply the patch the following steps are required:


  • In Win10/11, extract the contents of the patch to the Pacific Strike installation folder, e.g.

D:\Games\DOS\Pacific Strike\hdd\PS

  • In DOSBox, run the patch with:

C:\PS> patch.exe

  • Optional: Once the patch is installed the following patch files can be removed from the Pacific Strike installation folder:

patch.exe
patch.rtd
patch.rtp

This completes the Pacific Strike installation.


Configuration


The music and speech card configuration can be run from the Pacific Strike installation folder within DOSBox at any time with:

C:\PS> install.exe 

In-game configuration


In-game configuration is available while in-flight and accessed with <ALT> O. Most options are left to personal preference but the gallery below shows the steps in calibrating a 4-axis HOTAS with stick, throttle and rudder.


  • Accessing the in-flight options. Calibrate joystick will begin calibration.

Once calibrated the Flight Ctrl and Panning Ctrl may return to the joystick option, but can be set back to FS Pro.


Example video


Pacific Strike in DOSBox Staging.

Finally...


Credit and thanks go to:


  • Internet Archive for hosting the patch, Pacific Strike and strategy guide documents.

  • Old-Games.RU for hosting the patch and Pacific Strike documents.

  • The Patches Scrolls for hosting the patch.

  • Pix's Origin Adventures for hosting Pacific Strike and Speech Pack documents.

  • WinRetro for hosting the patch.


Good hunting!

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating

Drop Me a Line, Let Me Know What You Think

Thanks for submitting!

© 2023 by DarkenedRoom.. Powered and secured by Wix

bottom of page